ELECTRIC POOL HEATER 220V – PM 250

Temperature Adjustment The thermostat is designed to maintain a preset temperature level at a standard bath water temperature that does not exceed 40°C (104°F). However, if the bath is cold during startup, the thermostat will increase the temperature by 6 to 8°C based on the initial water temperature, room temperature, and bath size.
Pool Heaters Swimming pool heater is suitable for heating small hot springs, swimming pools, and other constant temperature systems. Capacity: No more than 2CBM; suitable for: Maximum 2CBM hot tub and swimming pool equipment. Note: Do not place any electrical appliances within 1.5 meters of the thermostat.
Instructions According to the power of the thermostat equipped with the appropriate power cord, the thermostat comes with the 3-pin power cord connected to the terminal near the terminal box, the power supply for the 220V – 240V / 50 ~ 60Hz, brown fire line that L terminal, blue The dyed line is the N terminal, and the yellow and green lines are connected to the ground line.
Note Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves.

The thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C

COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature

The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 ~ 8 °C / h elevated temperatures

Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on

Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off)

Thermostat outlet to the bathtub in the middle of the pipe or valve or check valve can not be installed

TAGS: heater, heating, electric heater, aluminum, aluminium, heating system,  cold water, hot water, shower, temperature, plumbing, stainless steel, flow, water supply, water, pressure system, skimmer, overflow, guarantee, indoor-outdoor pools, swimming pool, spa, jacuzzi, hot tub, water